waiting blindly for safe formwork removal
Concrete intelligence / 01
Concrete.
Certainty.
cMatriX.
Know exactly when your concrete is ready. Real-time strength, on the device and in your pocket.
No payment now. Reserve your place in the first production batch.
Supports EN 13670 §5.7 strikingBluetooth LERugged housing
PRODUCT VISUALISATION ●
CURRENT STRENGTH28.0 MPa100% DESIGN STRENGTH
cMatriX MOBILE APP
Setup · sync · reports.
The device shows live strength on its own; the app does the rest.
DOWNLOAD ON THE
APP STOREGET IT ON
GOOGLE PLAY Required for setup and reporting. iPhone app available now. Android coming with the first production batch.
APP STOREGET IT ON
GOOGLE PLAY Required for setup and reporting. iPhone app available now. Android coming with the first production batch.
The old way / 02
Concrete testing
shouldn’t slow
the pour.
Traditional testing leaves critical decisions to schedules, assumptions and slow laboratory feedback.
lost to avoidable delays and lab testing
from destructive cube tests
Three steps / 03
From fresh concrete
to a clear decision.
⌁
Place the sensor
A low-cost disposable temperature probe is embedded in the fresh concrete.
◉
It logs automatically
Temperature is recorded every 15 minutes and transferred through Bluetooth LE.
↗
See real strength
The app converts maturity into live MPa strength using the Sadgrove method.
Built for the site / 04
Rugged hardware.
Radically simple.
A reusable Bluetooth unit pairs with a disposable probe—so the intelligence comes back after every pour.
RUGGED SITE HOUSING15 MIN LOGGINGWEEKS BATTERY LIFE€18 DISPOSABLE PROBE
ENGINEERED FOR THE POUR. / PRODUCT VISUALISATION
The app / 05
Your pour.
Fully visible.
One interface for strength, temperature, forecasting and documentation—from the slab to the inspector.
Engineering confidence / 06
Built on proven
maturity science.
cMatriX combines Sadgrove maturity with Eurocode βcc strength development to translate temperature history into defensible site decisions.
Supports EN 13670 §5.7 strikingLAB VALIDATEDC20/25+
STRENGTH DEVELOPMENT / MPa
<8%ERROR VS. LAB CUBE TESTS
Proven accuracy / 07
Verified against
the press.
cMatriX calculates compressive strength using the maturity method recognised by building codes (ASTM C1074, Eurocode 2). Validated with independent, accredited-laboratory crush tests on a C20/25 (CEM II) mix — sensor in the concrete, cubes under the press.
| AGE | cMatriX READING | CRUSH TEST | DEVIATION |
|---|---|---|---|
| 1 day | 11.1 MPa | 11.2 MPa | 0.9% |
| 3 days | 19.4 MPa | 20.8 MPa | 7.2% |
| 7 days | 22.6 MPa | 23.7 MPa | 4.6% |
| 28 days | 28.0 MPa | 28.7 MPa | 2.4% |
All four points fall within the ±10% tolerance of ASTM C1074. Average deviation across the full curing cycle: 3.8%.
CONSERVATIVE BY DESIGN
Always on the safe side.
In lab validation, every deviation was conservative: cMatriX read slightly below the concrete's true strength. Final formwork decisions remain with the responsible site engineer.
Lab-tested, ASTM C1074 tolerance.
Documented formulas.
Calibration at 1 / 3 / 7 / 28 days.
cMatriX is a decision-support tool for formwork removal and schedule management — it does not replace the acceptance testing required by code.
THE cMatriX ADVANTAGE
Works where phones
are banned.
On secure construction sites — military facilities, embassies, correctional institutions, data centres and other restricted or classified areas — phones and app-readable devices are not allowed past the gate. Every phone- or cloud-dependent concrete monitor stops working there.
cMatriX doesn’t.
The device calculates concrete strength on-site and shows it directly on its own display — live MPa, maturity and formwork-removal status. The sensor is configured in the app before you enter the site. Inside, it needs nothing — you sync the data and generate the report once you are out.
BUILT FROM SITE EXPERIENCE
Our team has poured concrete on exactly these kinds of restricted sites, where strength had to be tracked by hand — manual thermometer readings and maturity calculations done on paper. cMatriX was built to end that: fully standalone, on-device strength readout, nothing to carry through security.
NO PHONE ON SITE
Strength is computed and displayed on the device itself.
NO SIGNAL NEEDED
Works fully offline on site; syncing happens later, outside the gate.
NOTHING BY HAND
No manual readings, no manual maturity math, no paperwork.
From military bases to embassies — cMatriX reads strength where nothing else can.
A simpler model / 08
No subscriptions.
No complexity.
| CAPABILITY | cMatriX | SMARTROCK | MATURIX | COMMAND CENTER |
|---|---|---|---|---|
| Built-in strength displayONLY cMatriX | ✓ | — | — | — |
| Reusable electronics | ✓ | — | ✓ | ✓ |
Based on the manufacturers' publicly available product information, September 2026. SmartRock, Maturix and COMMAND Center are trademarks of their respective owners.
Simple ownership / 09
Buy the sensor.
Own it forever.
The electronics are reusable across unlimited pours. Just swap the disposable probe between projects. No monthly fees to monitor your concrete.
STARTER
1 sensor
€299€299 / UNITTry it on a single pour.
MOST POPULAR
PRO
3 sensors
€799€266 / UNIT · SAVE €98Cover one full site — foundation, floor, and columns at once.
SITE
5 sensors
€1,249€250 / UNIT · SAVE €246For larger pours or a small contractor running several jobs.
FLEET
10 sensors
€2,299€230 / UNIT · SAVE €691Standard kit for a construction company.
No payment now — reserving places you in the first production batch.
EVERY SENSOR INCLUDES REUSABLE BLE ELECTRONICS + ONE DISPOSABLE PROBE. VAT EXCLUDED.
Consumables
Disposable probes
The probe stays in the concrete. The electronics come with you. Restock probes as you go — volume pricing.
1 PROBE€18
10 PROBES€15 / PROBE
20 PROBES€13 / PROBE
ORDER IN BULK AND SAVE. VAT EXCLUDED.
COMING SOON
cMatriX Cloud
Sync projects across your team, access reports from anywhere, and manage every pour from one dashboard. €10–15 per user / month.
Join the waitlist →Professional reports / 10
From measurement
to inspection.
In one tap.
Generate a professional PDF with the full strength curve, temperature history and pour details. Email it directly to site supervision or the building inspector.
- ONE TAP
- PDF GENERATED
- READY TO EMAIL
Ready when you are / 11
Stop guessing.
Start measuring.
Join the early access programme and bring real-time strength data to your next pour.